Skip to content

Step 1: Shopping list

Everything in our build. Prices are what each shop listed on 8 November 2026, and they move.

Roughly €2,400 before HOTAS and Magic Box. After the helicopter, the goggles are the biggest item, so owning a pair changes the sum a lot.

PartNeed it?Where
RotorScale UH-1D Huey 470 GPS, RTFThis buildMotionRC Europe, €965 incl. VAT. MotionRC US, $949

In the box: ROBAN X2 flight controller, GPS, 60 A dual ESC, motors, servos, a 4S 5200 mAh LiPo, charger and a Flysky radio.

PartNeed it?Where
XF C-20T gimbal, O4 Pro versionRequiredAllXF, $109 with the J1.0 config module. Rotorama, €119.09, module not included
XF Headtracker Datalink Pro kitFor its C-20 base plateRotorama, €57.49. Flying Tech, £44.99
DJI O4 Air Unit Pro (camera included)RequiredDJI Store, €249. Drones Made Easy, $249
DJI Goggles 3RequiredDJI Store, €669. Rotorama, €715.49
SyncPilot Headtracker SetAny PPM head trackerFMS, 395 PLN. Hobby Zone, $99.99

We couldn’t find the base plate sold on its own, which is why the kit is on the list. We use only the plate from it, plus the head-mounted module and its PPM output from the SyncPilot set.

Calibrating the gimbal and changing its settings takes the XF J1.0 config module, so pick a gimbal package that includes it.

PartNeed it?Where
Magic Box, ready-built version. The DIY kit needs assemblyOr a regular radioSilverFox RC shop
3S to 6S LiPo with XT60, plus a Y-cable to the module’s XT30Required on the ground. The 4S LiPo that comes with the helicopter works hereAny hobby shop
Flysky FRM303 TX moduleAny module and receiver that deliver S.BUSLindinger, €183.99, special order. Wetronic, €219, in stock
Flysky INr6-HS receiverMatches the moduleLindinger, €54.90. RCModelz, £39.99

HOTAS: any USB gear Magic Box supports. Ours:

PartWhere
WinWing Orion stick (base + F-16 grip)WinCtrl, €276.76
Logitech X56 (we use the throttle)Logitech EU, €194.99. Logitech US, $229.99
WinWing metal rudder pedals (older units are marked Skywalker)WinCtrl EU, €286.61. WinCtrl global, $298.55

Any other pack, including the LiPo from the kit, needs a resized cage. Li-ion and LiPo also need different voltage settings.

WhatFor
About 60 g of PLAThe mount
4 × M2×4 screws, 2 × self-tapping 2.0×6 screwsGimbal and air-unit plate
4S balance plugFPV power
1 servo plug, heat-shrink, zip tiesGimbal signal wires
Soldering iron, multimeter, 1.5 mm L-keyAssembly and checks
Windows PCGimbalConfig and CwHeadTracker run on Windows only
USB-A port or adapter, data cableConnecting to the flight controller